Technical Information
Electrohydraulic Actuators PVE-EX
PVE-EX control
PVE-EX: PVE control by voltage
PVE-EX ON/OFF activation
10 |
©
Danfoss | October 2017
PVE characteristic – control by voltage
2.5V
The PVEO has two independent powered sets of solenoids. By powering a set of pins the actuator is
activated. By standard mounted PVE the A set gives full flow on A port and B gives on B port. Both
directions activated at same time will keep the spool in neutral.
5V
PVEU
7.5V
fixed
kwa1463778286972
BC00000393en-US0102