Hearth and Home Technologies IntelliFire App Installation Instructions & User Manual page 6

6. Select your home Wi-Fi network
Note: You must select a 2.4GHz or 2.4GHz / 5GHz dual
band Wi-Fi network. The app does not work on
the 5GHz networks.
Note: If you receive an error message stating 'Error:
There was an error communicating with your
appliance. Verify you are connected to the
appliance's Wi-Fi network and try again' and
HAVE NOT selected the Wi-Fi network yet, press
'Okay' and the network list will be displayed
Carefully enter your network password in the space
provided. Once you have entered your password, select
Next, and you will hear the first audible beep. See Figure
7.
If you do not have password protection on your home
network, select Next, and you will hear the first audible
beep. See Figure 8.
NOTICE!:
Entering an invalid network password will
cause the App to display 'Error: There was an error com-
municating with the appliance. Verify you are connected
to the appliance's Wi-Fi network and try again'. If this
error occurs, refer to the Troubleshooting Section 13 for
specific steps to restart installation.
Figure 7 Select Wi-Fi Network
Hearth & Home Technologies • IntelliFire App Installation Instructions & User Guide • 2326-985 • 7/20
7. This pop-up screen is to inform you that the router
is connecting to the server. You will hear a second
beep and the progress bar completes. Press "Next"
button. See Figure 8.
Figure 8 Sychronizing
6