Hearth and Home Technologies IntelliFire App Installation Instructions & User Manual page 19

9. Next, the user will be prompted to enter a name for
the appliance, such as 'living room', 'fireplace 1', etc.
After another beep from the ECM, Press Continue.
See Figure 9.
Figure 9 Name the Appliance
10. Next the user will be prompted to select the brand
of the appliance being setup. Select and press
Continue. See Figure 10.
Figure 10 Brand Selection
19 Hearth & Home Technologies • IntelliFire App Installation Instructions & User Guide • 2326-985 • 7/20
11. The system will complete the setup process and
display the following screen if successful. See Figure
11.
Note: Do not select a brand until you have heard
a second beep. If you do not hear the second beep,
refer to the troubleshooting guide, "Did not hear a
second beep"
Figure 11 Connection Successful