Hearth and Home Technologies IntelliFire App Installation Instructions & User Manual page 10

Temperature
If this appliance location is equipped with an IFT-RC150
and/or IFT-RC400 remote, you can set and maintain your
desired room temperature with the thermostat function.
This function automatically adjusts your appliance to
maintain the desired set temperature.
Note: The RC150 or RC400 is required for thermostat
function. These remote controls are each equipped with
a sensor that measures temperature. Locate the remote
control in a location within the room that provides desired
flame height response and fireplace affect on tempera-
ture.
On/Off
This function is to turn your appliance thermostat ON or
OFF.
Temperature Adjustment
When the Temperature function is turned ON, the rotary
icon will activate for room temperature adjustment.
Rotate the temperature adjustment to the desired room
temperature.
BRAND NAME
Figure 3 Temperature
Hearth & Home Technologies • IntelliFire App Installation Instructions & User Guide • 2326-985 • 7/20
FUNCTIONS - iOS FUNCTIONS - iOS
Note: The temperature
display may deviate +/-
up to 2 degrees F from
what was set.
TEMPERATURE
ADJUSTMENT
THERMOSTAT
ON/OFF
Timer
A timer can be set to automatically turn off the appliance
after a set time, up to 2 hours and 59 minutes. Turn the
flame on prior to setting the timer. The timer will turn
the flame off automatically after the the selected preset
amount of time. See Figure 4.
To use the timer function, press 'Timer' icon on the main
screen. Select desired time by using scrolling 'H' (Hour)
and 'M' (Minute), then press the arrow icon to turn ON.
To turn the timer off , select timer from main screen and
press the 'X' icon to turn OFF.
BRAND NAME
Figure 4 Timer
Note: The timer display does not count down on the
app. The countdown is controlled by the IFT-ECM control
module in the appliance.
SET TIMER
OFF
ON
TIMER
10