Hearth and Home Technologies IntelliFire App Installation Instructions & User Manual page 21

Thermostat
You can set and maintain your desired room temperature
with the thermostat function. This function automatically
adjusts your appliance to maintain the desired set
temperature. The RC150 or RC400 is required for
thermostat use and is used to measure the temperature of
the room. See Figure 3.
Note: The RC150 or RC400 is required for thermostat
function. These remote controls are each equipped with
a sensor that measures temperature. Locate the remote
control in a location within the room that provides desired
flame height response and fireplace affect on tempera-
ture.
On/Off
This function is to turn your appliance thermostat ON or
OFF.
Temperature Adjustment
Rotate the temperature adjustment to set the appliance to
the desired temperature.
BRAND NAME
Figure 3 Temperature
21 Hearth & Home Technologies • IntelliFire App Installation Instructions & User Guide • 2326-985 • 7/20
FUNCTIONS - ANDROID FUNCTIONS - ANDROID
Note: The temperature
may adjust +/- 1 to 2
degrees on the display
from what was set.
TEMPERATURE
ADJUSTMENT
THERMOSTAT
ON/OFF
Timer
A timer can be set to automatically turn off the appliance
after a set time, up to 2 hours and 59 minutes. Turn the
flame on prior to setting the timer. The timer will turn
the flame off automatically after the the selected preset
amount of time. See Figure 4.
To use the timer function, press 'Timer' icon on the main
screen. Select desired time by using scrolling 'H' (Hour)
and 'M' (Minute), then move the slider switch to 'ON'. To
turn the timer off , move the slider switch to 'OFF'.
BRAND NAME
Figure 4 Timer
Note: The timer display will count down in the app. The
countdown is controlled by the IFT-ECM control module
in the appliance.
SET TIMER
ON/OFF
TIMER