Table of Contents
Advertisement
10. Changing a Network Router
Instructions for two options are listed below:
• If your appliance is still connected to the old network
router (recommended procedure).
• If you have changed your network router or you are
replacing a broken network router.
Note: The IntelliFire Wi-Fi module supports 2.4GHz
or 2.4GHz / 5GHz dual band Wi-Fi networks only. To
check your network frequency, refer to your wireless
router manual or contact your internet service pro-
vider.
If your appliance is still connected to the old net-
work router:
1. Go to IntelliFire app and delete the location of the ap-
pliances that will be on your new network router.
a. iOS smart devices – follow "Edit/Add Locations"
located in Section 5.
b. Android smart devices – follow "Edit/Add Loca-
tions" located in Section 7.
2. Replace network router and verify router is working
with a new SSID. The SSID is the network name you
set on your router.
3. Go to IntelliFire app and re-setup your appliance:
a. iOS smart device – follow "Set-up Instructions for
iOS" located in Section 4.
b. Android smart device – follow "Set-up Instruc-
tions for Android" in Section 6.
4. If your are adding additional appliances to this loca-
tion:
a. iOS smart devices - follow "Edit/Add Appliances"
located in Section 5.
b. Android smart devices - follow "Edit/Add Appli-
ances" located in Section 7.
31
Hearth & Home Technologies • IntelliFire App Installation Instructions & User Guide • 2326-985 • 7/20
If you have changed your network router or replac-
ing a broken network router:
1. Replace network router and verify router is working
with a new SSID. The SSID is the network name you
set on your router..
2. Go to IntelliFire app and delete the location of the
appliances that will be on your new network router.
a. iOS smart devices – follow "Edit/Add Locations"
located in Section 5.
b. Android smart devices – follow "Edit/Add Loca-
tions" located in Section 7.
3. (Recommend that this is performed by a hearth
professional) On your appliance, locate the Elec-
tronic Control Module (ECM) and press down on the
"PILOT" button for 10 seconds. Once you hear a
long beep, release button.
Figure 1
4. Go to IntelliFire app and re-setup your appliance:
a. iOS smart device – follow "Set-up Instructions for
iOS" located in Section 4.
b. Android smart device – follow "Set-up Instruc-
tions for Android" in Section 6.
5. If your are adding additional appliances to this loca-
tion:
a. iOS smart devices - follow "Edit/Add Appliances"
located in Section 5.
b. Android smart devices - follow "Edit/Add Appli-
ances" located in Section 7.
Once you have completed adding your appliance to the
new router, you can control your appliance with the Intel-
liFire app.
Hide quick links:
Advertisement
Table of Contents
