Wasp WPA1200 Product Reference Manual page 43

2. While holding the Backspace key, insert the tip of the stylus into the reset hole on the back of the
WPA1200 and press and hold the reset button until you see the splash logo screen appear and then
release the Backspace and reset buttons.
Note: The system is returned to the default settings. All registry settings and all files (including any hidden files)
are returned to their original factory defaults.
Method 2
1. Press and hold the TAB key.
2. While holding the TAB key, insert the tip of the stylus into the reset hole on the back of the WPA1200 and
press and hold the reset button until you see the splash logo screen appear and then release the TAB and
reset buttons.
Note: All registry settings are returned to default settings. You must reinstall all software. All files in flash memory
are retained.
WPA1200 Product Reference Guide
40