Checking The Main And Backup Battery Status - Wasp WPA1200 Product Reference Manual

Checking the Main and Backup Battery Status

This section describes how to view the power level for both the main and backup battery. To minimize power
consumption, you can define settings for the auto-off function and the processor's operation speed.
To check the main and backup battery status:
1. Open Power Properties.
If the Plug or Battery icon appears on your device, double-tap the icon to bring the Power Properties
screen.
On CE .Net 5 Devices: Tap Start → Settings → Control Panel → Power.
On Windows Mobile 5 Devices: Tap Start → Settings → System → Power.
Note: Press Fn key and "8" button
2. The battery menu item displays the status of the main and backup batteries. On the screen shown here, both
batteries are Good on the CE .Net 5 example and almost 100% on the Windows Mobile 5 example.
Note: It is necessary to charge the battery when the battery charge is Low or Very Low (below 10%). If the
battery does not accept a charge, contact Technical Support.
CE .Net 5
CE .Net 5
Windows Mobile 5
Windows Mobile 5
34
WPA1200 Product Reference Guide
Plug Icon