Wasp WPA1200 Product Reference Manual page 29

4. You are prompted for a passkey. Enter the Passkey.
5. On the PC screen, you are prompted to enter the Bluetooth PIN Code. Enter the same passkey you entered
in step 4.
6. On the WPA1200 tap Partnership Settings → Check Serial Port → Finish.
7. On your PC, click ActiveSync → Connection Setting → Select COM Port → OK.
When you installed your Bluetooth dongle or setup your integrated Bluetooth a COM port was selected.
Select the same COM port here. If you are not sure which COM port was selected look in your BT dongle or
integrated BT settings.
WPA1200 Product Reference Guide
26