Wifi Connection - Wasp WPA1200 Product Reference Manual

8. On the WPA1200 tap Start → Programs → ActiveSync → Menu → Connect via Bluetooth.

WiFi Connection

With the device's embedded WLAN module, you can send and receive signals to a WiFi network.
Note: WiFi access requires a separate purchase of a service contract with a wireless service provider. Contact a
wireless service provider for more information.
A wireless network can be added either when the network is detected or by manually entering settings
information. Before doing these steps, determine if authentication information is needed.
For CE .Net 5 Devices:
1. If the WIFI icon appears on the device, double-tap the icon to bring the WIFI Properties screen.
2. Select the Wireless Informatiom Tag.
3. If there are networks already detected, double-tap the network name, then config the Wireless Properties, tap
OK.
4. Tap and hold network name, then select Connect.
5. When finished, tap OK.
For more information on how to configure the wireless network settings, tap Start → Help.
WPA1200 Product Reference Guide
27