Adjusting The Screen Brightness; Using The Stylus; Using The Sd/Mmc Memory Card - Wasp WPA1200 Product Reference Manual

Adjusting the Screen Brightness

Adjust the screen brightness by pressing the Function button to enable the soft keys and pressing the 7
(decrease brightness) or 9 (increase brightness) buttons.
Decrease Brightness

Using the Stylus

CAUTION: Never use anything other than the WPA1200 stylus on the screen as it could cause permanent
damage.
1. Remove the stylus from its holder.
Hold the stylus as you would a pencil.
2. To make a choice from a menu, lightly tap the tip of the stylus
on that choice.
3. To write data into a field on a form, use the stylus to print the
letters or numbers. Use very light pressure.

Using the SD/MMC Memory Card

Your device has an expansion slot compatible with a range of SD and MMC storage cards, which are primarily
used to back up or transfer files and data. The slot also supports SDIO cards for added connectivity options.
Inserting a Storage Card
1. Remove the two screws from the SD compartment cover and remove the cover.
2. Insert the SD card with the notched corner as shown by the icon on the case.
WPA1200 Product Reference Guide
Function Button
Increase Brightness
13