Wasp WPA1200 Product Reference Manual page 25

d. Check Allow connections to one of the following and select Infrared Port (IR) from the drop-down list.
e. Click OK.
2. Perform the steps below on your CE .Net 5 device.
a. Align the IR port of your WPA1200 with that on your computer so that they are unblocked and within close
range.
b. Initiate connection by tapping Start → Settings → Control Panel → PC Connection.
c. Select Enable direct connections to the desktop computer using this check box.
d. Tap the Change Connection.
e. Select IRDA.
f. Tap OK.
Perform the steps below on your Windows Mobile 5 device:
a. Align the IR port of your WPA1200 with that on your computer so that they are unobstructed and within
close range.
b. Initiate connection by tapping Start → ActiveSync → Menu → Connect via IR.
c. Tap Sync.
WPA1200 Product Reference Guide
22