Connecting The Device To Your Computer - Wasp WPA1200 Product Reference Manual

A confirmation screen will appear when the installation is complete.
9. Click Finish.
You may be prompted to restart your computer.
After you have installed ActiveSync and restarted your computer, the ActiveSync icon appears in your computer's
system tray and the ActiveSync Connection Wizard starts. For detailed information on how to use ActiveSync on
your computer, start ActiveSync then click Help → Microsoft ActiveSync Help.

Connecting the Device to Your Computer

1. After ActiveSync has been installed, connect the USB charging cable to the universal connector on the
bottom of your device.
2. Plug the other end of the USB charging cable into a USB port on your computer.
3. Turn the device on.
ActiveSync starts automatically and configures the USB port to work with the WPA1200. The New
Partnership setup wizard will automatically start.
If ActiveSync doesn't start automatically, click Start → Programs → Microsoft ActiveSync.
If a message appears indicating that it is unable to detect a connection, click the Cancel button and
manually configure the communication settings.
4. Follow the onscreen instructions.
5. When the configuration process is complete, the ActiveSync window appears.
6. Synchronization will be initialized and will take place if you've chosen to synchronize periodically or upon
connection.
Your computer can create a partnership with multiple WPA1200s. Also, a WPA1200 can create a
partnership with up to two computers.
WPA1200 Product Reference Guide
19