Preamble/Postamble Configuration - Wasp WLP 4170 CCD Programming Manual

Setup & Configuration
—Preamble and Postamble
The 'Preamble' and 'Postamble' options are used to add prefix and suffix
characters to the bar code value. Up to 22 characters may be added for each
option separately.
Note: This example illustrates how data will be fo rmatted when each option is configured.
Preamble
NOTE: For help in configuring these settings, consult the programming
steps on page 5.
Begin
Set Preamble
Set Postamble
Exit
Data Stream Example
Data
Preamble
Scan 'Begin'. Scan "Set Preamble" to program
preamble. Scan characters from the back cover flap
using the ASCII Table on page 36. Scan "Set" on the
back cover flap to end.Scan 'Exit'.
Postamble
Scan 'Begin'.Scan "Set Postamble" to program
postamble. Scan characters from the back cover flap
using the ASCII Table on page 36. Scan "Set" on the
back cover flap to end.Scan 'Exit'.
11
Postamble
*Default