Preamble/Postamble; Terminator - Wasp WLR8950 User Manual

Preamble/Postamble

The 'Preamble/Postamble' configuration is used to add a prefix or suffix set of characters to the barcode value. Up to 8 characters
may be added for each option separately. Preamble and postamble characters can function concurrently, but need to be configured
separately.
To add preamble or postamble characters, follow the steps below:
1) Scan the 'Clear Pre/Postamble' barcode on this page.
2) Scan the 'Preamble' or 'Postamble' barcode.
3) Use Appendix B on pages 27-30 to locate the characters you want to add as preamble or postamble characters. Make sure that
you scan the barcode associated with each letter before preceding to the next character. For example, to add the letter "A," scan
the barcode corresponding to the letter "A". The letter "A" will always appear in your data as prefix or suffix to the
barcode value.
4) Scan the corresponding 'Pre/Postamble' barcode on this page to exit this setting.
Clear Pre/Postamble

Terminator

The 'Terminator' option is used to specify the end-of-text message and is primarily used to denote the end of the barcode value.
CR *
None
PREAMBLE/POSTAMBLE , TERMINATOR AND LABEL TYPE
Postamble
Tab
LF
CR + LF
10
Chapter 5
Preamble
Space
ESC
*Default