Exhaust Hose Installation; Choosing The Right Location - Dimplex DCP9 Instruction Manual

Installation
PREPARATION
NOTE: All the illustrations in the manual are for explanatory purposes only. Your
machine may be slightly different, but the actual shape will be similar. The unit can
be controlled by the unit control panel alone or with the remote controller.

EXHAUST HOSE INSTALLATION

The exhaust hose and adaptor must be installed or removed in accordance with the
usage mode. For COOL or AUTO mode the exhaust hose must be installed. For FAN
or DRY mode the exhaust hose must be removed.

CHOOSING THE RIGHT LOCATION

Your installation location should meet the following requirements:
• Make sure that you install your unit on an even surface to minimize noise and
vibration.
• The unit must be installed near a grounded plug, and the Collection Tray Drain
(found on the back of the unit) must be accessible.
• The unit should be located at least 50cm from the nearest wall to ensure proper
air circulation. The horizontal louver blade should be at least 50cm away from
obstacles.
• DO NOT cover the Intakes, Outlets or Remote Signal Receptor of the unit, as this
could cause damage to the unit.
14