Fan Mode; Cool Mode; Auto Mode - Dimplex DCP9 Instruction Manual

Functions
ON/OFF
Press to turn the unit on/off.
MODE
Press the MODE button to select the appropriate operating MODE. The modes that
can be selected, follow this sequence COOL > FAN > DRY and AUTO. The selected
mode indicator light will illuminate on the control panel.

FAN MODE

Press the MODE button until the FAN indicator light comes on. Press the FAN
SPEED button on the remote controller to choose the fan speed. The temperature
can not be adjusted in this mode, only the fan speed. The exhaust hose needs to be
removed during FAN MODE operation.
Up (-) / Down (+)
The Up (+) and Down (-) buttons are used to adjust (increase/decrease) the
temperature settings in 1°C increments. The temperature range can be set from 17°C
to 30°C.
NOTE: The control panel is capable of displaying the temperature in either degrees
Fahrenheit or degrees Celsius. To convert from one to the other, press and hold the
Up and Down buttons at the same time for 3 seconds.

COOL MODE

Press the MODE button until the COOL indicator light comes on. Press the Up (+)
or Down (-) buttons to select the desired room temperature. Press the FAN SPEED
button to choose adjust the fan speed. The exhaust hose needs to be used during
COOL MODE operation.
DRY / DEHUMIDIFY
Press the MODE button until the DRY indicator light comes on. The fan speed or
temperature cannot be set during DRY MODE. The fan will automatically operate at
LOW speed. NOTE: Keep windows and doors closed. The exhaust hose needs to be
removed during DRY MODE operation.

AUTO MODE

When you set the air conditioner to AUTO mode, it will automatically select
COOLING, or FAN only operation depending on the temperature you have selected
and the ambient room temperature. The unit will control the room temperature
automatically. NOTE: The fan speed cannot be set in AUTO mode,.
18