Maintenance; Lubrication; Vent; Replacing Lamps - Vulcan-Hart SG4C ML-114876 Installation & Operation Manual

WARNING: THE OVEN AND ITS PARTS ARE HOT. BE VERY CAREFUL WHEN OPERATING OR
CLEANING THE OVEN.
WARNING: DISCONNECT THE ELECTRIC POWER TO THE MACHINE AND FOLLOW THE
LOCKOUT/TAGOUT PROCEDURES.

LUBRICATION

The fan motor comes with sealed bearings and requires no lubrication.

VENT

Periodically check the flue, when the oven is cool, to be sure it is free of obstructions.

REPLACING LAMPS

• Allow oven to cool.
• Remove all racks by pulling forward, lifting up and out.
• Unscrew glass dome from light body.
• Replace the bulb.
• Reassemble glass dome and racks.

SERVICE AND PARTS INFORMATION

To obtain service and parts information concerning this model, contact the Vulcan-Hart Service Agency
in your area (refer to our website, www.vulcanhart.com for a complete listing of Authorized Service and
Parts depots).
When calling for service, the following information must be available: model number, serial number,
manufacture date (MD) and voltage.

MAINTENANCE

— 27 —