Maintenance; Cleaning; Stainless Steel Care - Vulcan-Hart VCH SERIES Installation & Operation Manual

VCH & VRT SERIES OVENS

CLEANING

The Oven and its parts
are hot. Be very careful when operating,
cleaning, or servicing the oven.
electrical power
cleaning.
Avoid splashing water into upper
areas of the oven to prevent damage
to electrical
connections.
Never spray the unit with a hose.
Never use harsh
abrasive pads to clean the oven.
DAILY:
1. Unplug electrical power supply.
2. Allow oven to go through cool-
down period before cleaning.
3. Remove the Interior Side Racks
4. Take the Interior Side Racks to a
sink or dishwasher for a thorough
cleaning. Use a mild soap and
water solution to clean these
items.
5. If necessary, clean the interior of
the oven with a damp cloth.
Wipe dry with a soft dry cloth.
6. Reassemble oven.
7. Clean the exterior of the oven
with a clean damp cloth.

MAINTENANCE

Always unplug
supply before
components or
chemicals or
HEAVY-DUTY CLEANING:
For heavy-duty cleaning, use warm
water, a degreaser, and a plastic,
stainless steel, or scotch-brite pad.
Never rub in a circular motion. Always
rub gently in the direction of the steel
grain. Rinse thoroughly and wipe dry
with a soft cloth.
The Power Module is removable. To
remove the Power Module, unclasp the
4 spring loaded clasps (2 per side).
Each Power
approximately 70 lbs., please follow
the lifting guidelines of your facility.
(Fig. 1)

STAINLESS STEEL CARE

CLEANING:
Stainless Steel contains 70 – 80% iron,
which will rust if not properly maintained.
Stainless Steel also contains 12 – 30%
chromium, which forms an invisible
passive, protective film that shields
against corrosion.
If the protective film remains intact, the
stainless steel
However, if the film is damaged, the
stainless steel can break down and rust.
PREVENTIVE CARE:
To prevent stainless steel break-
down, follow these steps:
1. Never use any metal tools,
scrapers, files, wire brushes,
or scouring pads (except for
stainless steel scouring pads,)
which will mar the surface.
11
F-41162 (07-12)
Module weighs
will remain intact.