Battery Installation And Charging - VTech CS5111-3 User Manual

Getting started

Battery installation and charging

Install the battery as shown below. The battery may have enough charge for
short calls. For best performance, charge the battery for at least 16 hours before
use. When the battery power s low, LOW BATTERY wll be dsplayed and wll
flash on the handset screen. When fully charged, the handset battery provides
approximately five hours of talk time or six days of standby time.
1. Insert the plug of the battery as ndcated. Make sure t s plugged securely
and matches the color-coded label nsde the battery compartment.
2. Place the battery wth the label THIS SIDE UP facng up and the wres nsde
the battery compartment.
3. Align the battery compartment cover flat against the battery compartment,
then slde t upwards untl t clcks nto place.
4. Charge the handset by placng t n the telephone base or charger. The handset
charge lght wll be on when chargng.
1
3
2
www.vtechphones.com
4
• If the handset wll
not be used for
a long perod of
tme, remove the
battery to prevent
possble leakage.
• To purchase a
replacement
battery, vst our
webste at www.
vtechphones.
com or call
1 (800) 595-9511.
In Canada, go to
www.vtechcanada.
com or call 1 (800)
267-7377.
3