Table of Contents
Advertisement
Battery installation and charging
Install the battery as shown below.
3
Click!
Charge for at least 30 minutes before initial settings.
Charge for 12 hours before initial use.
IMPORTANT:
Check for a dial tone by pressing
dial tone, the installation is successful.
If you do not hear a dial tone:
•
Make sure the installation procedures described above are properly done.
•
It may be a wiring problem. If you have changed your telephone service to
digital service from a cable company or a VoIP service provider, the telephone
line may need to be rewired to allow all existing telephone jacks to work.
Contact your cable/VoIP service provider for more information.
Headset charging
Charge for 3 hours before initial use.
Plug!
4
Light on!
/HOME,
3
CELL 1 or
CELL 2. If you hear a
Light on!
Advertisement
Table of Contents
