Table of Contents
Advertisement
Getting started
Battery installation and charging
Install the battery, as shown below.
1. Plug the battery connector securely into the socket inside the handset
battery compartment, matching the color-coded label. Insert the supplied
battery with the label THIS SIDE UP facing up, as indicated.
2. Align the cover flat against the battery compartment, then slide it upwards
until it clicks into place.
CHARGE light
To replace the battery, press the tab and slide the
battery compartment cover downwards. Lift out the old
battery and disconnect it from the handset. Follow the
instructions, as mentioned above, to install and charge the
new battery.
IMPORTANT INFORMATION:
•
Use only the supplied rechargeable battery or replacement battery (model BT183342/
BT283342). To order, visit our website at
1 (800) 222-3111
•
If you do not use the handset for a long time, disconnect and remove the battery to prevent
possible leakage.
3. Charge the handset by placing it face up in the
charger. The CHARGE light is on when charging.
www.telephones.att.com
1 (866) 288-4268
. In Canada, dial
11
or call
.
Advertisement
Table of Contents
