KitchenAid KUD Series Technical Education page 21

4. Pull the bottom drawer runners all the way
out. Make sure the latches on the back of
each drawer runner are facing forward.
drawer
runner
latch
bracket
latch
If the bottom drawer was rotated, rotate
the drawer to unwind the hoses and then
place the drawer on the runners, making
sure the hoses are looping upward.
Make sure both runner clips have snapped
into place. If not, pull the runner clips
forward until they do.
Close the bottom drawer.
5. Optional: If the top attaching brackets are
used, slightly open the top drawer.
Screw the top attaching brackets to the
underside of the counter with two #8 phillips
screws.
The top attaching brackets can accommo-
date a maximum 3/4" (19 mm) vertical
gap.
Close the top drawer.
2-11
top attaching bracket