Profibus Station Address - Siemens SIMOVERT MASTERDRIVE SLE Operating Instructions Manual

SLE / SLE-DP – SIMOLINK Encoder
6.4.2

PROFIBUS station address

Switch Designation
DP-SLAVE-ADDRESS PROFIBUS-DP station address
UNITS
0
0
UNITS rotary switch is the rear switch on the housing top panel (see plan view).
NOTICE
Siemens AG GWE-477 763 4070.76 J
SIMOVERT MASTERDRIVES
02.2001
A station address between 1 and 99 can be allocated via two BCD
rotary switches on top of the SLE-DP housing. Changing the station
address via PROFIBUS is not supported (SET_SLAVE_ADRESS see
above).
0
0
Fig. 6-6 SLE-DP; BCD rotary switch for station address
(illustrated setting: Station address = 47)
Meaning
= 10 * TENS + UNITS
Units digit of PROFIBUS station address
TENS Tens digit of PROFIBUS station address
Table 6-10 SLE-DP; BCD rotary switches
The possible setting of the BCD rotary switches to station address 0 is
converted internally to a station address of 126.
Operating Instructions
DP-SLAVE-
ADDRESS
UNITS
TENS
ERROR
Start-Up
Range
1...99
0...9
0...9
6-13