System Components; Table 1-2 Central Components; Table 1-3 Components On Profibus Dp - Siemens SIMOTION D45 Series Manual

Description

1.2 System components

1.2 System components
Central components
SIMOTION D4x5 communicates with automation components via the following interfaces:
• PROFIBUS DP
• Ethernet
• PROFINET (when using a CBE30)
• DRIVE-CLiQ (DRIVE Component Link with IQ)
The most important components of the system and their functions are shown below.
Table 1-2
Component
SIMOTION D4x5 controller
System software
Power supply
PROFIBUS DP
The control unit can communicate with the following components via the PROFIBUS DP
interfaces:
Table 1-3
Component
Programming device (PG/PC)
SIMATIC S7 controllers with
PROFIBUS DP interface
SIMATIC HMI device
Additional control unit
14
Central components
Function
... is the central motion control module.
You can use the integrated rapid digital I/Os as:
Homing inputs
•
Inputs for measuring inputs
•
Outputs for output cams
•
User-addressable process inputs/outputs
•
The measuring sockets can output any analog signals.
The basic functionality of SIMOTION D is supplied on a Compact Flash
card containing the following:
SIMOTION Runtime (Kernel and technology packages)
•
Drive software of SINAMICS S120 - implements all drive functions
•
... provides the electronic power supply for SIMOTION D, e.g., SITOP
Components on PROFIBUS DP
Function
... configures, parameterizes, programs, and tests with the
"SIMOTION SCOUT" engineering system (ES)
... is used for operating and monitoring functions. This is not an
essential requirement for the operation of a control unit.
D4x5
Manual, 03/2007 Edition