Maintenance; Recommended Maintenance Schedule(S); Cleaning The Hood Screen; Cleaning The Bagger And Bags - Toro 31211 Operator's Manual

Triple bagger hopper kit groundsmaster 360 and 7200 series traction unit
Table of Contents

Advertisement

Maintenance

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 8 hours
Before each use or daily
Every 100 hours

Cleaning the Hood Screen

Service Interval: Before each use or daily
The screens need to be cleaned before each use. In wet grass
they will need to be cleaned more often.
1. Disengage the power take-off (PTO) and set the
parking brake.
2. Shut off the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
3. Open the bagger hood.
4. Clean the debris from the screen.
5. Close the bagger hood.

Cleaning the Bagger and Bags

Service Interval: Before each use or daily
The bagger needs to be cleaned daily.
1. Wash the inside and outside of the bagger hood, bags,
tube, and the underside of the mower deck. Use a mild
automotive detergent to remove dirt.
2. Make sure that you remove matted grass from all parts.
3. After washing all the parts, let them dry thoroughly.
Note: With all parts installed, start and run the machine for
a minute to assist in drying.
Maintenance Procedure
• Inspect the bagger.
• Clean the hood screen.
• Clean the bagger.
• Inspect the bagger.

Inspecting the Bagger

Service Interval: Every 100 hours
After the first 8 hours
1. Disengage the PTO, move the motion-control levers to
the N
-
EUTRAL
LOCK
2. Shut off the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
3. Check the upper tube, lower tube, bagger hood, and
the blower assembly. Replace these parts if they are
cracked or broken.
4. Check the bags, bagger frame, and screen. Replace any
parts that are cracked, torn, or broken.
5. Tighten all nuts, bolts and screws.

Inspecting the Mower Blades

1. Inspect the mower blades regularly and whenever a
blade strikes a foreign object.
2. If blades are badly worn or damaged, install new blades.
Refer to your machine Operator's Manual for complete
blade maintenance.

Installing the Mower Blades

In most mowing conditions, the standard high lift blades will
provide the best bagging performance.
The Toro Atomic blade is recommended for bagging leaves
in dry conditions. In dry dusty conditions, the medium lift
or low lift blades will reduce dust and dirt blowout while
providing effective bagging air flow.
Contact an Authorized Service Dealer for the proper blades
for different mowing conditions.
Refer to the machines Operator's Manual for more information
on installing blades.
12
position, and set the parking brake.

Advertisement

Table of Contents
loading

Table of Contents