Safety And Instructional Decals - Toro VS-400 Operator's Manual

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area of potential
danger. Replace any decal that is damaged or lost.
1. Read the Operator's Manual for information on starting the
engine—1) Turn on the engine switch; 2) Close the choke
and turn on the fuel switch; 3) Pull the recoil starter; 4) Open
the choke.
2. Read the Operator's Manual for information on stopping the
engine—1) Turn off the engine switch; 2) Turn off the fuel
switch.
3. Warning—read the Operator's Manual; wear hearing
protection.
4. Warning—keep away from moving parts; keep all guards and
shields in place.
1. Lift point
93-9084
125–8203
5. Warning—keep bystanders away.
6. Choking hazard—do not run the engine in an unventilated
area.
7. Explosion hazard—stop the engine and extinguish all flames
before refueling.
1. Rotating belt — Keep guard in place
5
117–2718
117–4979