Lifting The Machine - Toro VS-400 Operator's Manual

Lifting the Machine

Moving the Machine with the Lifting
Plate
Important: Use lifting equipment with a 61 kg (134 lb)
or greater lift capacity.
1. Remove the spreaders and screed boards from the
machine; refer to Removing the Spreaders and Screed
Boards (page 14).
2. Move the lever for the fuel valve to the Off position,
refer to Fuel Valve (page 8).
3. Align the hook, strap, or cable of the lifting equipment
to the hole in the lifting bracket (Figure 21).
1
2
G020991
1. Lifting equipment
4. Raise the machine and move it to the desired location.
5. Carefully lower the machine.
6. Remove the lifting equipment (Figure 21).
Figure 21
2. Lift bracket
16