Moving Seat Into Service Position (Modulite) - Invacare Pronto M41 Series Service Manual

Under Seat
Depending on seat variant
(1) Tilt actuator (optional)
(2) Elevate actuator (optional)

6.7 Moving Seat into Service Position (Modulite)

It is necessary to move the seat into the service position or to remove it for maintenance purposes or if the batteries
have to be removed.
CAUTION!
Risk of crushing
The seat is very heavy. Risk of injury to hands and feet.
– Use proper lifting techniques.
Risk of injury due to uncontrolled movement of the wheelchair
– Switch the vehicle's power system off (ON/OFF key).
– Engage the drive motors
– Secure the vehicle against rolling away by pressing the parking brake down.
CAUTION!
Risk of crushing
The seat has no stopper to prevent it from falling over backwards when being unlocked.
– Be careful when unlocking the seat.
– Pay attention to your hands and feet.
• Wooden block (30 x 40 x 29 cm)
1. Pull bungee cord (1) under seat on centre column (2)
to unlock seat.
2. Place wooden block under backrest to avoid collision
of tie down bracket with seat plate in service position.
3. Carefully fold seat backwards.
4. The seat is now in service position.
1568396-C
Fig. 6-2
Fig. 6-3
Fig. 6-4
Service
25