Overview - Invacare Pronto M41 Series Service Manual

Invacare® Pronto™ M41 Series
Component
Power legrests (if
fitted)
Battery mounting
Batteries
Remote / power
module
Chair configuration
Screws (every 6
months)

6.6 Overview

Under Rear Shroud/Seat
Depending on seat variant
(1) Power module
(2) Actuator module (optional)
24
Check Remedy
Check cable Replace cable if
necessary.
Check contacts
Check functions
Check battery support Replace if necessary.
and mounting belts
for damage
Check batteries for Replace batteries if
damage necessary.
Check battery voltage Charge batteries.
Check contacts and Clean contacts and
terminals terminals.
Remote, status LED
Evaluate error/flash
flashing
code.
Fixings
Tighten fixings,
replace if necessary.
Cables and connecting Replace damaged
plugs cables and tighten
connecting plugs, if
necessary.
Joystick function Replace joystick knob
if necessary.
Replace remote if
necessary.
Power supply Replace damaged
cables and tighten
connecting plugs, if
necessary.
Check chair Update software
configuration version if newer version
available.
Check screws for tight Tighten screws if
fit necessary.
Notes
See 6.12.5 Replacing Batteries,
page 43 and 6.12.2 Handling
Damaged Batteries Correctly, page
40.
See user manual.
See 6.12 Batteries, page 40.
See 6.4 Troubleshooting, page 20.
See LiNX service manual.
Fig. 6-1
1568396-C