Designating One Video Tuner - Bose LIFESTYLE 18 II Series Quick Setup Manual

Follow the process below:
Turn on your component. Turn on the TV and be sure to select the Video input on the TV for
the media center. Then using the LIFESTYLE® remote control, press the
AUX
source button and
continue:
1. Identify the device:
• From the Remote Control options in the System menu, select
AUX Device.
• Move to the right and up or down in the list to select a component by pressing
Enter.
2. Identify the brand:
• In the menu options on the left, select
AUX Brand.
• Move to the right and up or down in the alphabetical list to locate your brand.
• Press Enter to select that brand.
3. Select the device code:
• From the menu options on the left, select
AUX Device Code.
• Move right to select the first code.
• Press the Play or Channel/Track up button on the LI FESTYLE® remote control.
If the component responds, press other buttons to make sure important functions on
the component also work. If the component does not respond, select a different code
and try again.
• When you have chosen the best code for your component, press the Enter button.
• Press the System or Exit button to leave the System menu.
Designating one video tuner
If the LIFESTYLE® remote controls several video components, you can choose one of them
as the primary channel selector. This gets your channel tuning commands to your cable box,
even when TV or VCR is selected. You don't need to switch to CBUSAT to change channels.
) Note: For general guidelines on using the LIFESTYLE® System menu, refer to "Making system
adjustments" on page 29.
Make this selection from the Remote Control options in the System menu. In the
TV Tuner
list,
select one of your components. Then press the System or Exit button to leave the menu.
Figure 7
Designating the TV
as
video
tuner
23