Designating One Video Tuner - Bose LIFESTYLE 18 series II Operating Manual

Follow the process below:
Turn on your component. Turn on the TV and be sure to select the Video input on the TV for
the media center. Then using the LIFESTYLE ®remote control, press the AUX source button and
continue:
1. Identify the device:
• From the RemoteControloptions in the System menu, select AUX Device.
• Move to the right and up or down in the list to select a component by pressing Enter.
2. Identify the brand:
• In the menu options on the left, select AUX Brand.
• Move to the right and up or down in the alphabetical list to locate your brand.
• Press Entertoselect that brand.
3. Select the device code:
• From the menu options on the left, select AUX Device Code.
• Move right to select the first code.
• Press the Play o r Channel/Track upbutton on the LIFESTYLE ®remote control.
If the component responds, press other buttons to make sure important functions on
the component also work. If the component does not respond, select a different code
and try again.
• When you have chosen the best code for your component, press the Enter button.
• Press the System or Exitbutton to leave the System menu.
Designating one video tuner
If the LIFESTYLE ® remote controls several video components, you can choose one of them
as the primary channel selector. This gets your channel tuning commands to your cable box,
even when TV or VCR is selected. You don't need to switch to CBL/SAT to change channels.
Note: For general guidelines on using the LIFESTYLE_ System menu, refer to "Making system
adjustments" on page 29.
Make this selection from the Remote Controloptions in the System menu. In the "IV Tuner list,
select one of your components. Then press the System o r Exit b utton to leave the menu.
Figure 7
Designating the TVas video
tuner
23