Bose LIFESTYLE 18 II Series Quick Setup Manual page 17

Figure 9
Connecting the two-wire
cable to cube speakers
2. Connect the wire end of one speaker cable to the terminals on the rear of the matching
speaker.
• Press the terminal tab on the back of the speaker and insert the marked wire (+) into the
red terminal and the plain wire (-) into the black terminal.
• Release the tab to secure the wire. Repeat this step for each of the five speakers.
Left, Right, or Center
printed on the red
collar on (+) wire
3. Connect each cable to the corresponding jack on the Acoustimass® module (Figure 10).
• Plug the blue connectors into the matching left front, center, and right front jacks.
• Plug the orange connectors into the matching left surround and right surround jacks.
Figure 10
Speaker connections to the
Acoustimass module
Left
Front speakers
Center Right
Surround speakers
Left Right
14
Acoustimass module connector panel
) Note: You may find it more convenient to place the Acoustimass module upside down while
making connections. When done, place it on any of its sides but not on either end or top.