Using Component Video Connections - Bose LIFESTYLE 18 II Series Quick Setup Manual

Using Component video connections
Follow the connection diagram in Figure 23 to achieve the best video quality for DVD and
cable/satellite viewing, while adding a VCR to your home theater. Refer to "Component
video" on page 24, if necessary.
To watch DVDs and see L1FESTYLE® system menus, select the VIDEO 4 input on your TV,
or,
jf your cable/satellite box has component jacks, connect them as shown in the diagram and
select VIDEO 4 on your TV. Select CBUSAT on your L1FESTYLE® system remote.
Connect the VCR (VIDEO OUT) to an available VIDEO IN jack on your TV. Select that TV input.
Connect the VCR (Audio Land R OUT) to the TV Audio IN jacks on the media center and
select the TV source on your L1FESTYLE® system remote.
Figure 23
Component video
connection
J
Note: To make the connections shown in the diagram below, you will need additional cables.
Component video adapter
TV
VCR
SET TOP BOX
J
Note: Two component video adapters are provided.
27