Designating One Video Tuner - Bose LIFESTYLE 38 Operating Manual

Designating one video tuner

Figure 11
Designating the TV as video
tuner
Follow the process below:
Turn on your component. Turn on the TV and be sure to select the Video Input on the TV for
the media center. Then using the LIFESTYLE
continue:
1. Identify the device:
• From the Remote Control options in the System menu, select
• Move right and up or down in the list to select a component by pressing
2. Identify the brand:
• In the menu options on the left, select
• Move right and up or down in the alphabetical list to locate your brand.
• Press Enter to select that brand.
3. Select the device code:
• From the menu options on the left, select
• Move right to select the first code.
• Press the Play or Channel/Track up button on the LIFESTYLE
– If the component responds, press other function buttons to make sure important
functions on the component also work.
– If the component does not respond, select a different code and try again.
• When you have chosen the best code for your component, press the Enter button.
• Press the System or Exit button to leave the System menu.
®
If you set the LIFESTYLE
of them as then primary channel selector. This allows your remote to change the channels on
your cable box, even when TV or VCR is the selected source. So you never need to switch to
CBL/SAT to change stations.
Note: For general guidelines on using the LIFESTYLE
adjustments" on page 40.
Make this selection from the Remote Control options in the System menu. In the
select one of your components. Then press the System or Exit button to move out of the menu.
IR Control:
TV Tuner: TV
TV Brand: VCR
TV Device Code:
VCR Brand:
Choose the one you want to control.
navigate select
Controlling External Sources
® remote control, press the AUX source button and
AUX Brand
AUX Device Code
remote to control several video components, you can choose one
®
Remote
Control
.
AUX Device
Enter.
.
.
® remote control.
System menu, refer to "Making system
list,
TV Tuner
33