Step 15: Light Blue Bag - Vision Fitness Multi-Station Gym ST710 Owner's Manual

LIGHT BLUE BAG
15
STEP
• Slide a large disc onto extension of
knee pad post (AH1). Slide a round pad
onto the extension, followed by a small
disc. Secure with a bolt (M8x20) and a
flat washer (8.4x15x1.6). Repeat this
process to attach pads to other extension on
knee pad post, and extensions on leg curl
AJ3
post (AH2).
• Secure seat back (J10) and seat bottom
J10
(J11) on press arm seat back support (AJ3)
J11
and press arm seat bottom post (AJ4) by
using eight bolts provided (M10x25).
AJ4
• Slide a round pad (J12) on each
Large Discs
extension of the leg press seat back
assembly (AJ7 & AJ8). Secure pads with a
J12
disc, a bolt (M8x20), and a flat washer
(8.4x15x1.6). Attach seat back (J15) and
AH1
seat bottom (J11) on leg press seat back
support (AJ7) and leg press seat bottom
support (AT1) using eight bolts (M10x25).
AH2
NOTE: Check to make sure the press
arm, functional arm, and leg press/lat
J12
pulldown cables are taught. If tightened
properly, there should be no more than
1" of play between the beginning of
an exercise and the movement of the
Small Discs
weight plates. If there is more play
than this, thread one or more connection
p o i n t s f u r t h e r. T h e c a b l e s a r e t o o
J15 tight if the weight selector pin can't
easily be inserted. If this is the case,
AJ8
back off the bolts at one or more of
the connection points, until the pin can
be easily inserted.
J12
AJ7
J11
AT1
25