Model Numbering System - JUKI MO-6800S Series Engineer's Manual

3. Model numbering system

MO-6800S series model numbering system
1 2 3 4 5 6
M O 6 8 △ △ S ◇ □ △ △ ◇ ◇ ／ □ △ △ ◇ □ △ △ △ － □ □ △
3-6 Machine code
6804 1-needle 3-thread overlock
6814 2-needle 4-thread overlock
6816 2-needle 5-thread safety stitch
6843 3-needle 6-thread safety stitch
6845 2-needle double chainstitch
7 Specification code
S Standard
8 Needle gauge code
0 1-needle
B 2.0 mm
D 3.0 mm
F 5.0 mm
1 5.0 + 2.0 mm
2 3.0 + 2.0 mm
* In the case that the machine code is "6845", it is
possible to use "F" only.
9 Overedging width code
A 1.5 mm
D 3.0 mm
E 4.0 mm
F 5.0 mm
H 6.0 mm
* In the case that the machine code is "6845", it is
possible to use "F" only.
10 10 Feed dog code
4 2-row
6 3-row
* In the case that the machine code is "6845", it is
possible to use "6" only.
11
(Classification based on materials to be used)
Extra light-weight to
1
lightweight materials
2 Light-weight to medi-
um-weight materials
3
4
Medium-weight to
5 heavyweight materials
6
7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
Material code
For light-weight materials such as
shirts or the like
Knit wear only
General fabrics
Knit wear only such as sweater or
the like
Medium-weight to heavy-weight
materials such as denim or the like
Heavy-weight materials
Application code (Classification based on type
12
of operation and process)
0 Standard
4 For attaching tape
5 For binding
6 For binding tape
Special machine code (Special classification
13 of machine, structure and specification other
than gauge set)
0 Special
H Standard
P Anti-material-slip capability type
15-22 Device and attachment code
Presser foot (for sharp curve)/tape
G44/Q143
guide for attaching tape
N075 Four-fold binder
24
A Standard
B Europe
G China (Chinese domestic)
25
A Standard
B Europe
G China (Chinese domestic)
26
0 Fully-sunken
1 Semi-sunken
– 3 –
Destination code
Accessory code
Table code