Guide On Setting Of Remote Controller - Kohler K-77795 Series Homeowner's Manual

Guide on Setting of Remote Controller

Push and hold
ush
light blink 3 times. Then press D/F/G/H/J/L/N to change setting accordingly.
D - Rear wash... Deodorizer function setting
Push and hold the button to activate or deactivate deodorizing function.
Night light quick blink once indicates activate deodorizer function (short beep).
¨
Night light slow blink once indicates deactivate deodorizer function (long beep).
¨
F - Flush full...auto fIush setting
Push and hold the button to stop flushing function, restore auto flush when Push and hold the button again.
Night light quick blink once indicates activate auto flush function (short beep).
¨
Night light slow blink once indicates deactivate auto flush function (long beep).
¨
G - Cover Open/Close...Sensor distance setting
Push and hold to perform auto cover Open/Close sensor area setting.
Night light quick blink once indicates short distance (short beep).
¨
Night light quick blink twice indicates medium distance (short beep).
¨
Night light quick blink three times indicates short distance (short beep).
¨
Night light slow blink once indicates deactivate auto cover Open/Close function (long beep).
¨
H - Seat Open/Close...Prolonged seating indication setting
Push and hold to enter prolonged seating indication function setting.
Night light quick flash once (short beep), prolonged seating indication function activated;
¨
Night light slow flush once (long beep), prolonged seating indication function deactivated.
¨
J - Spiral wash...Night light function setting
Push and hold to enter night light function setting.
Short beep indicates night light function activated.
¨
Long beep indicates night light function deactivated.
¨
L - One button sterilization function...auto UV sterilization setting
Push and hold the button for UV auto sterilization On/Off status setting.
Night light quick blink once indicates activate auto UV sterilization function (short beep).
¨
Night light slow blink once indicates deactivate auto UV sterilization function (long beep).
¨
N - Seat temp...Energy saving setting
Push and hold seat temp button to activate energy saving function, push and hold the button to deactivate
function.
Night light quick blink once indicates activate energy saving function (short beep).
¨
Night light slow blink once indicates deactivate energy saving function (long beep).
¨
Kohler Co.
G
Q-
button on toilet side panel until a short beep is generated, and release the button after night
A
B C D E
H M I N O J
9
F
P K Q+ L
1295780-X5-C