Remote Controller Setting Guide - Kohler K-77798T-0 Homeowner's Manual

Eir intelligent toilet (wt2,hs) p trap, eir intelligent toilet (wt2,hs) p trapex
Hide thumbs Also See for K-77798T-0:
Table of Contents

Advertisement

Low voltage alarm
Note: please replace battery in time when the voltage alarm starts.
When N battery alarm icon blinks indicate remote battery is almost used up. Replace battery is required.
Pairing
When cover and seat is powered on, long press dryer button, when all lights quick blinks twice, dryer light blinks
slowly. Long press Front and Rear Wash buttons both on side panel simultaneously in 20s, release button until
one short beep is generated. When light strip stops blinking indicates pairing is successful.
Communication between remote control and toilet
When remote moves away from sensing zone, press any button, all light strip will blinks slowly, starts searching
connection. After successful connection, it will stop blinking.
Remote setup instruction
Note: Normal function will not be used when initiate any long press setting.
B
Front Wash...night light setting
Long press this button to start night light setting mode, Front Wash icon blinks slowly; press Front Wash icon
to change setting per activation or deactivation circulation.
1. When Front Wash indicating LED lights up, indicates night light starts. Toilet generates one short beep.
2. When Front Wash indicating LED lights OFF, indicates night light stops. Toilet generates one long beep.
J
Flush full...auto flush setting
Long press this button to start auto flush setting mode, Flush FULL icon blinks slowly. Press flush FULL icon
to change setting per activation or deactivation circulation.
1. When Rear Wash indicating LED lights up, indicates auto flush function starts. Toilet generates one short beep.
2. When Rear Wash indicating LED lights OFF, indicates auto flush function stops. Toilet generates one long beep.
K
Cover...auto cover OPEN and sensing distance setting
Long press this button to start auto cover OPEN and sensing distance setting mode; cover icon blinks slowly.
Press cover icon again to change setting per OFF, near, mid, far, OFF, near ......circulation.
1.
When massage indicating LED lights OFF, indicates auto cover OPEN function stops. Toilet generates one long beep.
2.
When massage indicating LED 1 lights up, indicates auto cover near distance function starts. Toilet generates one short beep.
3.
When massage indicating LED 2 lights up, indicates auto cover mid distance function starts. Toilet generates one short beep.
4.
When massage indicating LED 3 lights up, indicates auto cover far distance function starts. Toilet generates one short beep.
1357243-T01-H
I
J
A
B
C
K
L
M
D
E
F
8
N
G
H
Kohler Co.

Advertisement

Chapters

Table of Contents
loading

Table of Contents