SINAMICS S120 Fail-Safe Drives
Description
The safety configuration
window for the drive opens.
The particular configuration
window can be opened – in
which you can make the
appropriate parameter
settings – using the various
buttons.
In the "Configuration" win-
dow, ensure that the correct
drive type has been en-
tered.
The encoder data of the
drive are entered in the
"Encoder parameterization"
window.
Note: If, in the application,
only the motor encoder
is used, then for "2nd
encoder" the same
settings are entered as
for "1st encoder".
I DT Safety Integrated
Comment
Page 39/43
Entry ID: 28424136
MC-FE-I-005-V11-EN