Starter Relay To Starter Motor Positive Cable Bypass Test - Victory Cross Roads Classic Service Manual

ELECTRIC STARTER
Starter Relay To Starter Motor Positive Cable
Bypass Test
WARNING
Secure motorcycle and place transmission in
neutral for the following test.
WARNING
The following test involves high current, heat and
possible sparks. Wear a face shield and approved
safety glasses while doing the following test.
1. Place the transmission in neutral.
Starter
Relay
2. Connect one clamp of a heavy-duty, automotive
remote starter switch to positive terminal lug at starter
motor.
18.12
9924047 - 2012-2013 VICTORY Cross Roads / Cross Country Service Manual
2 pin connector
© Copyright 2012 Polaris Sales Inc.
3. Connect other clamp of remote starter switch to
positive terminal of battery.
WARNING
Do not allow any part of the jumper cable clamp to
touch the chassis or any other ground. Be sure
transmission is in neutral.
4. Make sure transmission is in neutral, key switch off and
stop switch off.
5. Pull in clutch lever and depress the remote starter
switch momentarily.
6. If starter turns, there is excessive resistance in the
positive, high current side of the starter system. Go to
Positive Side Voltage Drop Test.
7. If starter does not turn, go to Negative Cable Bypass
Test.