Victory Cross Roads Classic Service Manual page 37

SPECIFICATIONS / GAUGE / AUDIO
AUDIO MODE MENUS (Cont.)
Driver Icom Volume Mode
(See page 1.34 to enter and exit mode menus).
Press TUNE (+) or TUNE (-) to adjust.
ICOM VOL 15
+
TUNE
-
Driver CB Volume Mode
Press TUNE (+) or TUNE (-) to adjust.
+
TUNE
-
CB LO/DX Mode
Press TUNE (+) or TUNE (-) to change settings. See
page 1.40 for more detailed CB / ICOM information.
+
CB LO / DX MODE
TUNE
-
+
CB LO / DX MODE
TUNE
-
1.36
9924047 - 2012-2013 VICTORY Cross Roads / Cross Country Service Manual
CB VOL 15
DISTANT
LOCAL
© Copyright 2012 Polaris Sales Inc.
Radio Data System (RDS) Mode
(See page 1.34 to enter and exit mode menus).
Press TUNE (+) or TUNE (-) to turn RDS on, full, or off.
When ON, the screen will display the 8 character station
identification in the upper left of the display. When turned
to FULL, the screen will display the 8 character station
identification in the upper left of the display plus the
extended station information such as artist and song title
in the center of the display (if available in the radio signal
you are receiving).
+
TUNE
-
+
TUNE
-
+
TUNE
-
Aux Mode
(See page 1.34 to enter and exit mode menus).
Press TUNE (+) or TUNE (-) to choose AUX (for iPod or
any other MP3 player) or NAV MP3 for navigation unit MP3
player use.
NOTE: NAV MP3 mode will override any device
connected with an input cable. If using NAV MP3
mode, always pause the Garmin unit before
changing sources. Otherwise, music from the NAV
unit will interrupt the new source, interpreting it as
navigation commands, not music.
+
TUNE
-
+
TUNE
-
RDS
ON
RDS
FULL
RDS
OFF
AUX MODE
AUX
AUX MODE
NAV MP3