Lincoln Electric VRTEX 360 Operator's Manual page 37

Tolerances Pattern and Aim Screen
Overview
This screen allows the user to change the type of pattern
being used (stringer, box weave, straight weave, whip,
triangle weave) and the position of the root of the weld.
The X and Y values change the location of where the
weld bead should be placed. This affects the position
parameter on the LASER screen. The +/-determines
how far off from the ideal position the student can place
the electrode before it results in a misplaced weld.
PATTERN & AIM SCREEN
COORDINATE CHART FOR WELD PLACEMENT (POSITION)
TEE PIPE GROOVE
English English
34