Lincoln Electric VRTEX 360 Operator's Manual page 19

Login Screen:
Overview
This page allows the user to:

Enter username

Select Language Preference "Orange Button"

Select Imperial or Metric units "Blue Button"

Shutdown System "Red Menu Button"

Continue to the next Setup Screen "Green
Button"

Theory "Yellow Button"
1. On Screen Keyboard
The user enters their name by using the joystick and red
select button on the VR weld machine. The joystick
allows the user to navigate the keyboard graphic to
highlight letters. Pressing the red select button enters
the letter highlighted into the enter name box as
indicated. The virtual keyboard starts with shift enabled,
so the first letter is automatically capitalized. The user
can select shift or lock (equivalent to caps lock on a
standard keyboard) at any time. If the user makes a
mistake, they can select the back arrow to delete the last
character entered.
LOGIN SCREEN
2. Language
Selecting the orange language menu button brings up
the list of languages the software supports. Use the
joystick to highlight the desired language.
MEASUREMENT UNITS
Coupon Thickness
Gas Flow Rate
Wire Feed Speed
Weldometer™ - Base Metal
Weldometer™ - Gas
Weldometer™ - Consumables
English
Press the red select button to accept.
Press the orange language menu button again to exit the
language menu. The system stores the language
selection and will automatically start up in the same
language the next time.
3. Measurement Units
The blue unit menu button brings up the measurement
system. Use the joystick to highlight the desired unit of
measurement. Press the red select button to accept.
Press the blue button again to exit the measurement unit
menu. Selecting Metric or Imperial converts the user
interface into the corresponding measurement system.
The system stores the measurement selection, so it will
automatically start up in the same unit of measurement
the next time. The system uses the units shown in Table
B.1.
4. Menu
The red menu button allows the student to shut down the
system. If the user selects shutdown, a submenu
appears asking the user if they are sure that they want to
shut down the system. This prompt prevents the user
from accidentally shutting down the system. If the user
selects "Yes", the VRTEX
THIS METHOD SHOULD ALWAYS BE USED TO SHUT
DOWN THE VRTEX
cause damage to the system.
5. Continue
After the user enters their name and all selections out-
lines above have been made, the green panel button is
pressed to continue to set up process.
6. USB Indicator
The circular USB icon in the upper right corner of the
screen indicates the presence of a USB memory stick in
the front of the machine. A translucent icon indicates no
USB memory stick is present. A green icon indicates a
USB memory stick is in place in the front of the machine.
TABLE B.1
Imperial
Abbrev. Details
in. inches
CFM cubic feet per minute
IPM inch per minute
lbs pounds
CF cubic feet
lbs pounds
16
®
360 will shut down.
WARNING
®
360. Failure to do this could
Metric
Abbrev. Details
mm millimeters
LPM liters per minute
MPM meters per minute
kg kilograms
L liters
kg kilograms
English