Appendix B - Logging In And Out - Graco PR70 Operation & Maintenance Manual

Appendix B - Logging In and Out

On power up, the user is the default with limited access
to screens. To log in to the supervisor level:
1. Press the login button on the Startup screen.
2. The login entry screen appears.
3. Press User (F2) button to enter supervisor. The
Keyboard screen appears.
4. Type in supervisor and enter (the lower right key).
5. The Login entry screen pops up again.
6. Press Password (F3) button to enter the password.
The Keyboard screen pops up again.
7. Type in the password "1492" and hit enter.
334116D
8. If the password is correctly entered, the Startup
screen will show the user as supervisor.
9. To logout, press the logout button on the startup
screen. The screen will show Default as the user if
the Supervisor is logged out.
Appendix B - Logging In and Out
43