HMI Navigation Overview
Icon
Description
Displays the position and speed of the servo motor in units of motor revolutions and motor revolutions
per second.
This starts the cycle. The color is green as long as the pumps are cycling
Enter the volumetric ratio of A to B material. This value is used for calculating shot size only, it doesn't
change the ratio.
This displays the flow rate the pumps will cycle at. Note if the speed control is User Entered, the value
of the chosen programmed flow rate will be displayed. If the Remote Speed is chosen, the converted
analog speed value will be displayed.
This displays the shot size the pumps will dispense based on the chosen programmed shot size.
18
334116D