Port Settings - ViewSonic PJ1158 User Manual

Port Settings

Displays and configures communication port settings.
Item
Network Control Port1
(Port:23)
Port open
Authentication
Network Control Port2
(Port:9715)
Port open
Authentication
Image Transfer Port
(Port:9716)
Port open
Authentication
SNMP Port
Port open
Trap address
SMTP Port
Port open
Clck the [Apply] button to save the settngs.
NOTE
• The new configuration settings are activated after restarting the net-
work connection. The network connection must be restarted when the configu-
raton settngs are changed. The network connecton can be restarted usng
[Network Restart] on the man menu.dresses.
ViewSonic
Configures command control port 1 (Port:23).
Clck the [Enable] check box to use port 23.
Clck the [Enable] check box when authentcaton s requred
for ths port.
Configures command control port 2 (Port:9715).
Clck the [Enable] check box to use port 9715.
Clck the [Enable] check box when authentcaton s requred
for ths port.
Configures the image transfer port (Port:9716).
Clck the [Enable] check box to use port 9716.
Clck the [Enable] check box when authentcaton s requred
for ths port.
Configures the SNMP port.
Clck the [Enable] check box to use SNMP.
Configures the destination of the SNMP Trap in IP format.
Configures the SMTP port.
Clck the [Enable] check box to use the e-mail function.
PJ1158
Description
Settings
63