Option Menu - ViewSonic PJ1158 User Manual

OPTION Menu

OPTION Menu
From the OPTION menu, tems shown n the table below can be
performed.
Select an item using the ▲/▼ cursor buttons on the projector or
remote control, and press the ► cursor button on the projector or
remote control, or ENTER button on the remote control to execute
the tem, except for the tems LAMP TIME and FILTER TIME.
Then perform t accordng to the followng table.
Item
AUTO SEARCH
AUTO KEY-
STONE
AUTO ON
(contnued on next page)
ViewSonic
Using the ▲/▼ buttons turns on/off the automatic signal search func-
ton.
TURN ON ó TURN OFF
When the TURN ON s selected, detectng no sgnal automatcally cycles
through nput ports n the followng order. The search s started from the
current port. Then when an nput s found, the projector wll stop searchng
and dsplay the mage.
RGB 1 ð RGB 2 ð M1-D ð COMPONENT ð S-VIDEO ð VIDEO
Using the ▲/▼ buttons turns on/off the automatic keystone function.
TURN ON ó TURN OFF
TURN ON : Automatc keystone dstorton correcton wll be execut-
ed whenever changng the slant of the projector.
TURN OFF : Ths functon s dsabled. Please execute the AUTO
KEYSTONE
stone dstorton correcton.
• When the projector s suspended from the celng ths feature wll
not functon properly so select the TURN OFF.
• Ths functon wll be unavalable when the Transton Detector s
on.
Using the ▲/▼ buttons turns on/off the AUTO ON function.
TURN ON ó TURN OFF
When set to the TURN ON, the lamp n projector wll be automatcally
turned on wthout the usual procedure, only when the projector s suppled
wth the power.
• Ths functon does not work as long as the power has been suppled to
the projector whle the lamp s off.
• After turnng the lamp on by the AUTO ON functon, f nether nput nor
operaton s detected for about 30 mnutes, the projector s turned off, even
though the AUTO OFF functon s dsabled.
PJ1158
Description
EXECUTE in the SETUP Menu for automatic key-
42