Setup Menu - ViewSonic PJ1158 User Manual

SETUP Menu
From the SETUP menu, tems shown n the table below
can be performed.
Select an item using the ▲/▼ cursor buttons on the
projector or remote control, and press the ► cursor button
on the projector or remote control, or the ENTER button
on the remote control to execute the tem. Then perform t
accordng to the followng table.
Item
AUTO KEY-
STONE
EXECUTE
KEYSTONE
KEYSTONE
(contnued on next page)
ViewSonic
Selectng ths tem performs the Automatc keystone dstorton cor-
recton. Projector automatcally corrects vertcal keystone dstorton
due to the (forward/backward) setup angle by tself.
Ths functon wll be executed only once when selected n the Menu.
When the slant of the projector s changed, executes ths functon agan.
• The adjustable range of ths functon wll vary among nputs. For
some nput, ths functon may not work well.
• When V:INVERT or H&V:INVERT s selected to the MIRROR tem n the
SETUP menu, f the projector screen s nclned or angled downward, ths
functon may not work correctly.
• When the zoom adjustment s set to the TELE (telephoto focus), ths
functon may be excessve. Ths functon should be used when the zoom
adjustment is set to the full WIDE (wide-angle focus) whenever possible.
• When the projector s placed on the level (about ±3°), ths functon may not work.
• When the projector s nclned to near ±30 degree or over, ths
functon may not work well.
• When the vertcal lens shft s not set fully upward (not set fully downward for
the optional lens type FL-601 only), this function may not work well.
• When the horzontal lens shft s not set to the center, ths functon
may not work well.
• Ths functon wll be unavalable when the Transton Detector s on.
Using the ▲/▼ buttons corrects the vertical keystone distortion.
Shrnk the top of the mage ó Shrnk the bottom of the mage
• The adjustable range of ths functon wll vary among nputs. For
some nput, ths functon may not work well.
• When the vertcal lens shft s not set fully upward (not set fully downward for
the optional lens type FL-601 only), this function may not work well.
• When the horzontal lens shft s not set to the center, ths functon may not work well.
• Ths functon wll be unavalable when the Transton Detector s on.
Using the ▲/▼ buttons corrects the horizontal keystone distortion.
Shrnk the rght of the mage ó Shrnk the left of the mage
• The adjustable range of ths functon wll vary among nputs. For
some nput, ths functon may not work well.
• When the horzontal lens shft s not set to the center, ths functon may not work well.
• Ths functon wll be unavalable when the Transton Detector s on.
PJ1158
Description

SETUP Menu

35