Table of Contents
Advertisement
Command Control Settings (Continued)
When the authentcaton settng s enabled, the followng settngs are requred.
7) Clck [Security Settings] on the man menu.
8) C lck [Network Control] and enter the desred authentcaton password. * See
Note1.
9) Clck the [Apply] button to save the settngs. * See Note2.
NOTE1
• The Authentcaton Password wll be the same for [Network Control
Port1 (Port: 23)], [Network Control Port2 (Port: 9715)], and [Image Transfer
Port (Port: 9716)].
NOTE2
• The new configuration settings are activated after restarting the
network. Restart the network when any configuration settings are changed.
The network connecton can be restarted usng [Network Restart] on the man
menu.
ViewSonic
PJ1158
Command Control via the Network
89
Advertisement
Table of Contents
